Product Information

1. Bottle
2. Pump
3. Brush and Hose
4. Insulated jacket
5. Comfortable Strap for easy to carry

Direction for use

1. Take out the product from the packing box.
2. Release the pressure by pulling the safety valve before refilling.
3. Remove the head of the black part of the bottle to fill with water. Please follow the given instructions on the bottle for the water level.
4. Tighten all the connections to ensure a good seal.
5. Press the pump handle 15 times max to build the pressure in the bottle. Press the trigger on the brush for the water flow. It will give you time to rinse and brush off the mud.
6. Once you finish your job release the pressure by pulling the valve. Open the bottle and remove water from the brush head, hose and the bottle. Shake the brush by pressing the trigger to remove the water from the brush and hose. Dry the product before storing.

Safety instructions

Don’t leave the product under pressure or filled. Store the product dry under 20-25 degree centigrade of temperature. Don’t forget to release the pressure before refilling or storing.

Keep this product out of reach from children. If you want to use this product with chemicals please strictly follow the instructions. Always wear protective clothing, gloves and, mask.